Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see 1 Safety Instructions.
Step 2 Press the button on the cover of the front I/O module. See step (1) in Figure 5-51.
Step 3 Remove the cover from the front I/O module in the arrow direction. See step (2)
in Figure 5-51.
Figure 5-51 Removing a cover from a front I/O module
Step 4 Remove the cable from the iBBU. See step (1) in Figure 5-52.
Step 5 Open the latches on the iBBU deck, and remove the iBBU. See steps (2) and (3) in
Figure 5-52.
Figure 5-52 Removing an iBBU
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 169
To Next Page
Loading...
