● You have obtained the cabinet number and chassis number of the RH8100 V3.
● You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
● You have determined the position on the RH8100 V3 for installing the hard
disk indicator panel.
Tools
● ESD gloves
● Packaging materials, for example, an ESD bag
● Phillips screwdriver
Hardware
Spare hard disk indicator panel
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see 1 Safety Instructions.
Step 2 Take the spare hard disk indicator panel out of its ESD bag.
Step 3 Insert the hard disk indicator panel into the port. See step (1) in Figure 5-83.
Step 4 Tighten the screw on the hard disk indicator panel. See step (2) in Figure 5-83.
Step 5 Install the hard disk enclosure panel. See step (3) in Figure 5-83.
Figure 5-83 Installing a hard disk indicator panel
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 200
To Next Page
Loading...
