Figure 5-101 Removing a supercapacitor tray
Step 4 Open the two latches on the supercapacitor cover in their respective directions
while pulling out the supercapacitor cover, and remove the supercapacitor cover.
See steps (1) and (2) in Figure 5-102.
Step 5 Remove the cable from the supercapacitor. See step (3) in Figure 5-102.
Figure 5-102 Removing a supercapacitor
Step 6 Place the removed supercapacitor in an ESD bag.
----End
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 220
To Next Page
Loading...
