Tools
● ESD gloves
● Packaging materials, for example, an ESD bag
● Phillips screwdriver
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see 1 Safety Instructions.
Step 2 Loosen the screws on the supercapacitor tray. See step (1) in Figure 5-123.
Step 3 Lift the supercapacitor tray out of the server. See step (2) in Figure 5-123.
Figure 5-123 Removing a supercapacitor tray
Step 4 Open the two latches on the supercapacitor cover in their respective directions
while pulling out the supercapacitor cover, and remove the supercapacitor cover.
See steps (1) and (2) in Figure 5-124.
Step 5 Remove the cable from the supercapacitor. See step (3) in Figure 5-124.
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 245
To Next Page
Loading...
