Tools
● ESD gloves
● Packaging materials, for example, an ESD bag
● Phillips screwdriver
Hardware
Spare supercapacitor
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see 1 Safety Instructions.
Step 2 Take the spare supercapacitor out of its ESD bag.
Step 3 Connect the power cable to the supercapacitor. See step (1) in Figure 5-125.
Step 4 Place the supercapacitor in the tray, and push down the supercapacitor cover in
the arrow direction until the latches on the supercapacitor cover snap into the
tray. See step (2) in Figure 5-125.
Figure 5-125 Installing a supercapacitor
Step 5 Place the supercapacitor tray in the front I/O module. See step (1) in Figure
5-126.
Step 6 Tighten the screws on the supercapacitor tray. See step (2) in Figure 5-126.
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 247
To Next Page
Loading...
