Huawei RH8100 V3 - Page 346

Procedure
Disconnect the chassis power cables from external power supplies.
1. Power o the server and disconnect all chassis power cables from external
power supplies. For details, see 6.2 Powering O the RH8100 V3.
Set the hardware congurations of the two partitions.
2. Adjust the hardware
congurations for the two partitions and ensure that the
hardware modules are installed properly.
Resource allocation of the front panel in dual-system is shown in Figure 7-27,
Figure 7-28, Figure 7-29, Figure 7-30 and Table 7-4.
Figure 7-27 Resource allocation of the front panel (FM-A) in dual-system
RH8100 V3 Server
User Guide 7 Conguring the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 336