Huawei RH8100 V3 - Page 365

Step 5 Congure IP address information for the iBMC management network port.
To set a conguration item, press ↑ or ↓ to select the conguration item, and then
press Enter. You can set the mode, address type, and IPv4 and IPv6 addresses of
the iBMC management network port.
Step 6 Press F10 to save the settings and exit.
----End
Querying and Setting the IP Address on the LCD
Step 1 Query the IP address.
1. On the liquid crystal display (LCD), touch the Setting tab.
The Setting screen is displayed, as shown in Figure 9-4.
Figure 9-4 Setting
Step 2 Set the IP address.
1. Click the Mgmt Port tab.
The Mgmt Port screen is displayed, as shown in Figure 9-4.
2. Set the IP address of the management network port based on the parameter
information described in Table 9-2.
The soft keyboard is displayed after you click the text box. You can use the soft
keyboard to set the IP address or click Cancel to return to the Mgmt Port screen.
Table 9-2 Required data
Category
Parameter Description Value Example
IP address
Information of
IPv4
RH8100 V3 Server
User Guide 9 Common Operations
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 355