(v) ROBONET communications number of retries setting …
Number of retries for ROBONET communications (communications of ROBONET Gateway
⇔ each unit such as RACON) can be set in the range of 0 to 6 times.
The factory setting is 0. (Firmware version 000E to)
Caution
Speed setting unit (for direct numerical specification (positioning) mode only) cannot be changed unless one axis or more
is set to the direct numerical specification (positioning) mode.
[3] After editing of the special parameters is complete, press “Close” and close the window.
The following message will be displayed.
Press “Yes” to execute a transfer.
Press “No”, and the transfer cannot be executed, and the edited parameters are not reflected.
To Next Page
Loading...
