Icom IC-7800 - Page 169

12-13
12
SET MODE
Sets the introductory text, up to 10-character long,
displayed in the opening screen.
Usually, you set your call sign for the opening
screen.
Capital letters, small letters, numerals, some symbols
(– / . @) and spaces can be used.
zPush[F-5•EDIT]toselectthenameeditcondi-
tion.
 •Thecursorunderthe1stcharacterblinks.
x Push [ABC], [abc], [123] or [Symbol] to select the
character group, then rotate the main dial to select
the character.
 •Push[ABC]or[abc]totogglecapitalandsmallletters.
 •
Push [123] or [Symbol] to toggle numerals and symbols.
 •Push[F-1•Ω]or[F-2•≈] for cursor movement.
•Push[F-3•DEL]todeletetheselectedcharacter.
 •Push[F-4•SPACE]toinputaspace.
 •Pushing the transceiver’s keypad, [0]–[9], can also
enter numerals.
c Push [EXIT/SET] to set the name.
■ Display set mode (continued)