12-17
12
SET MODE
Selects the RTTY shift width. There are 3 selectable
values: 170, 200 and 425 Hz. (default: 170 Hz)
170 Hz is automatically selected when the internal
RTTY decoder is used.
Selects the RTTY keying polarity. Normal or reverse
keying polarity can be selected.
(default: Normal)
When reverse polarity is selected, Mark and Space
are reversed.
•Normal :Keyopen/close=Mark/Space
•Reverse :Keyopen/close=Space/Mark
Selects the desired PSK tone frequency for the PSK
reception from 1000, 1500 and 2000 Hz.
(default: 1500 Hz)
Selects the speech language from English and Japa-
nese. (default: English)
Selects the speech speed from HIGH (faster) and
LOW (slower). (default: HIGH)
■ Others set mode (continued)
The IC-7800 speech processor has frequency, mode
and signal level announcement. Signal level an-
nouncement can be deactivated if desired.
(default: ON)
When “OFF” is selected, the signal level is not an-
nounced.
Selects the operating mode speech capability when a
mode switch is pushed; ON or OFF.
(default: OFF)
When “ON” is selected, the selected operating mode
is announced when a mode switch is pushed.
To Next Page
