Icom IC-7800 - Page 206

D Command table (continued)
14-8
14
CONTROL COMMAND
Cmd. Sub Cmd. Data Description
1A 050174
see p. 14-12 Send/read antenna selection for 22.00
to 26.00 MHz band
050175
see p. 14-12 Send/read antenna selection for 26.00
to 30.00 MHz band
050176
see p. 14-12 Send/read antenna selection for 30.00
to 45.00 MHz band
050177
see p. 14-12 Send/read antenna selection for 45.00
to 60.00 MHz band
050178 00 or 01 Send/read antenna temporary mem-
ory set (00=OFF, 01=ON)
050179 00 to 02 Send/read antenna selection
(00=OFF, 01=Manual, 02=Auto)
050180 00 or 01 Send/read usage for ANT2
(00=OFF, 01=TX/RX)
050181 00 or 01 Send/read usage for ANT3
(00=OFF, 01=TX/RX)
050182 00 to 02 Send/read usage for ANT4
(00=OFF, 01=TX/RX, 02= RX)
050183 00 to 20 Send/readVOXdelay
(00=0.0 sec. to 20=2.0 sec.)
050184 00 to 03 Send/readVOXvoicedelay
( 00=OFF, 01=Short, 02=Mid.,
03=Long)
050185 00 to 09 Send/read NB depth (00=1 to 09=10)
050186 0000 to
0255
Send/read NB width
(0000=1 to 0255=100)
050187 00 to 03 Send/read screen saver set
( 00=OFF, 01=15 min., 02=30 min.,
03=60 min.)
050188 00 to 02 Set/read screen saver type
(00=Bound, 01=Rotation, 02=Twist)
050189 00 to 02 Set/read meter response setting
(00=SLOW, 01=MID, 02=FAST)
050190 00 to 03 Set/read FFT scope averaging set for
RTTY decoder
(00=OFF, 01=2, 02=3, 03=4)
050191
see p. 14-11 Set/read FFT scope waveform color
set for RTTY decoder
050192 00 to 03 Set/read FFT scope averaging set for
PSK decoder
(00=OFF, 01=2, 02=3, 03=4)
050193
see p. 14-11 Set/read FFT scope waveform color
set for PSK decoder
050194 00 or 01 Set/read PSK AFC function tuning
range (00=±8 Hz, 01=±15 Hz)
050195 00 or 01 Set/read APF type
(00=SHARP, 01=SOFT)
050196 00 or 01 Send/read external keypad set for
RTTY memory (00=OFF, 01=ON)
050197 00 or 01 Send/read external keypad set for
PSK memory (00=OFF, 01=ON)
050198 00 or 01 Voicememorytransmissionsetfor
[F1]–[F4] on the keyboard
(00=OFF, 01=ON)
050199 00 or 01 Memory keyer transmission set for
[F1]–[F4] on the keyboard
(00=OFF, 01=ON)
050200 00 Send/read time-out timer OFF
01 Send/read 3 min. time-out timer
02 Send/read 5 min. time-out timer
03 Send/read 10 min. time-out timer
04 Send/read 20 min. time-out timer
05 Send/read 30 min. time-out timer
050201 00 to 06 Send/read APF AF level.
(00=0 dB to 06=+6dB)
Cmd. Sub Cmd. Data Description
1A 050202 0000 to
0255
Send/read LAN MOD output level
(0000=0% to 0255=100%)
050203 00 to 05 Send/read the TX Delay setting (HF)
( 00=OFF, 01=10 ms, 02=15 ms,
03=20 ms, 04=25 ms, 05=30 ms)
050204 00 to 05 Send/read the TX Delay setting (50M)
( 00=OFF, 01=10 ms, 02=15 ms,
03=20 ms, 04=25 ms, 05=30 ms)
050205 00, 01 Send/read the Shutdown function.
( 00=Shutdown, 01=Standby/Shut-
down)
050206 0000 to
0223
Send/read the transceive CI-V Ad-
dress for LAN to REMOTE in hexadec-
imal code.
(0000=00h to 0223=DFh)
050207 Send/read the default gateway set
( 0000000000000001=0.0.0.1 to 0255
025502550254=255.255.255.254, or
FF=Blank)
050208 00, 01 Send/read the remote control capabil-
ity. (00=OFF, 01=ON)
050209 000001 to
065535
Send/read the control port setting by
accessing from internet.
(000001=1 to 065535=65535)
050210 000001 to
065535
Send/read the serial port setting by
accessing from internet.
(000001=1 to 065535=65535)
050211 000001 to
065535
Send/read the audio port setting by
accessing from internet.
(000001=1 to 065535=65535)
050212 00, 01 Send/read the internet access line
setting.
( 00=FTTH (Fiber To The Home),
01=ADSL/CATV)
050213
see p. 14-13 Send/read Network radio name
(up to 16-character)
050214 00 to 04 Send/read the maximum AF sample
rates for remote stations.
( 00=8 kHz, 01=12 kHz, 02=16 kHz,
03=24 kHz, 04=48 kHz)
050215 00 to 02 Send/read the AF codecs for remote
stations.
( 00=LPCM 8bit,
01=LPCM 8bit, u-law 8bit,
02=LPCM 8bit, u-law 8bit, LPCM 16bit)
050216 00, 01 Send/read the stereo operation capa-
bility for remote stations.
(00=1ch, 01=2ch)
050217 00, 01 Send/read the network TX audio set-
ting for remote stations.
(00=OFF, 01=ON)
050218 00 to 04 Send/read the maximum modulation
sample rates for remote stations.
( 00=8 kHz, 01=12 kHz, 02=16 kHz,
03=24 kHz, 04=48 kHz)
050219 00 to 02 Send/read the modulation codecs for
remote stations.
( 00=LPCM 8bit,
01=LPCM 8bit, u-law 8bit,
02=LPCM 8bit, u-law 8bit, LPCM 16bit)
050220 00, 01 Send/read the waveform outline indi-
cation on the spectrum scope.
(00=Fill, 01=Fill+Line)
050221
see p. 14-11 Send/read the waveform outline color
for receiving signal.