EasyManua.ls Logo

Icom IC-7800 - Page 91

Icom IC-7800
230 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-7
D Scope set mode (continued)
5
FUNCTIONS FOR RECEIVE
Set the scope edge frequencies for fixed mode scope
when the 1.6 to 2 MHz band is selected.
•Setthefrequenciesbetween1.600to2.000MHz
range in 1 kHz steps.
Set the scope edge frequencies for fixed mode scope
when the 2 to 6 MHz band is selected.
•Setthefrequenciesbetween2.000to6.000MHz
range in 1 kHz steps.
Up to 500 kHz band width can be specified, so ei-
ther edge frequency will be set to the difference
between higher and lower frequencies become 5
to 500 kHz automatically while setting another
edge frequency.
Set the scope edge frequencies for fixed mode scope
when the 6 to 8 MHz band is selected.
•Setthefrequenciesbetween6.000to8.000MHz
range in 1 kHz steps.
Up to 500 kHz band width can be specified, so ei-
ther edge frequency will be set to the difference
between higher and lower frequencies become 5
to 500 kHz automatically while setting another
edge frequency.
Set the scope edge frequencies for fixed mode scope
when the 15 to 20 MHz band is selected.
•Setthefrequenciesbetween15.000to20.000MHz
range in 1 kHz steps.
Up to 500 kHz band width can be specified, so ei-
ther edge frequency will be set to the difference
between higher and lower frequencies become 5
to 500 kHz automatically while setting another
edge frequency.
Set the scope edge frequencies for fixed mode scope
when the 11 to 15 MHz band is selected.
•Setthefrequenciesbetween11.000to15.000MHz
range in 1 kHz steps.
Up to 500 kHz band width can be specified, so ei-
ther edge frequency will be set to the difference
between higher and lower frequencies become 5
to 500 kHz automatically while setting another
edge frequency.
Set the scope edge frequencies for fixed mode scope
when the 8 to 11 MHz band is selected.
•Setthefrequenciesbetween8.000to11.000MHz
range in 1 kHz steps.
Up to 500 kHz band width can be specified, so ei-
ther edge frequency will be set to the difference
between higher and lower frequencies become 5
to 500 kHz automatically while setting another
edge frequency.

Table of Contents

Other manuals for Icom IC-7800

Related product manuals