Icom IC-7800 - Page 92

5-8
5
FUNCTIONS FOR RECEIVE
D Scope set mode (continued)
Set the scope edge frequencies for fix mode scope
when 26 to 30 MHz band is selected.
•Setthefrequenciesbetween26.000to30.000MHz
range in 1 kHz steps.
Up to 500 kHz band width can be specified, so ei-
ther edge frequency will be set to the difference
between higher and lower frequencies become 5
to 500 kHz automatically while setting another
edge frequency.
Set the scope edge frequencies for fixed mode scope
when the 45 to 60 MHz band is selected.
•Setthefrequenciesbetween45.000to60.000MHz
range in 1 kHz steps.
Up to 500 kHz band width can be specified, so ei-
ther edge frequency will be set to the difference
between higher and lower frequencies become 5
to 500 kHz automatically while setting another
edge frequency.
Set the scope edge frequencies for fixed mode scope
when the 30 to 45 MHz band is selected.
•Setthefrequenciesbetween30.000to45.000MHz
range in 1 kHz steps.
Up to 500 kHz band width can be specified, so ei-
ther edge frequency will be set to the difference
between higher and lower frequencies become 5
to 500 kHz automatically while setting another
edge frequency.
Set the scope edge frequencies for fixed mode scope
when the 22 to 26 MHz band is selected.
•Setthefrequenciesbetween22.000to26.000MHz
range in 1 kHz steps.
Up to 500 kHz band width can be specified, so ei-
ther edge frequency will be set to the difference
between higher and lower frequencies become 5
to 500 kHz automatically while setting another
edge frequency.
Set the scope edge frequencies for fixed mode scope
when the 20 to 22 MHz band is selected.
•Setthefrequenciesbetween20.000to22.000MHz
range in 1 kHz steps.
Up to 500 kHz band width can be specified, so ei-
ther edge frequency will be set to the difference
between higher and lower frequencies become 5
to 500 kHz automatically while setting another
edge frequency.