Icom IC-GM800 - Page 46

41
2001 NEW 2001 NEW
7
DSC OPERATION
D Sending a Distress Relay call (continued)
8. Select “Call Frequency.”
9. Select an option.
(Example: 2187.5 kHz)
10. Push [Call] to send the Distress Relay call.
11. After sending, the following screen is displayed.
 See page 29 for details of the software key function
in the DSC Task mode.
12. Hold down [PTT] to communicate with a coast
station.
13. Push [Standby Mode] to return to the
Standby mode.
Rotate
+
Push
CH/GRP
Rotate
+
Push
CH/GRP
Push
■ Sending a Distress call