Icom ID-5100A

8
GPS OPERATION
8-30
Add a GPS memory (Continued) D
EnteringtheGPSMemoryname2.
Touch [NAME] y
• Enters the GPS Memory name edit mode.
Touch the keypad. u
• Enters the desired character or symbol.
• In the Alphabet entry mode, touch “” to enter an upper
case letter once, or touch “
” to continuously enter upper
case letters. Touch “
” to enter lower case letters.
• Touch [[ab]] or [[12]], and then touch [ab], [12] or [(!"#)] to
select the desired entry mode.
Entry mode
setting window
• Touch “ab⇔12” to toggle between the Alphabet entry and
Number entry modes.
• Touch “SPACE” to enter a space.
• Touch [CLR] to delete the selected character, symbol or
number.
• Touch [QUICK], and then touch “Switch to Tenkey” to
switch the keyboard type.
Selectablecharactersandsymbols
A to Z, a to z, 0 to 9, ! " # $ % & ’ ( ) * + ,
- . / : ; < = > ? @ [ \ ] ^ _ ` { | } ˜ (space)
i Touch [] to move the cursor backwards, or touch
[] to move the cursor forwards.
o Repeat steps u and i to enter a GPS memory
name of up to 16 characters, including spaces.
!0 After entering, touch [ENT].
• Returns to the “GPS MEMORY EDIT” screen.
Example: When “Icom 01” is entered.
Adding or editing GPS memory
EnteringtheGPSMemorydate3.
!1 Touch “DATE.”
• Enters the date edit mode.
!2 Touch [+] or [–] to enter the date.
• From 2000/01/02 to 2099/12/30 can be entered.
!3 Touch [].
EnteringtheGPSmemorytime4.
!4 Touch “TIME.”
• Enters the time edit mode.
!5 Touch [+] or [–] to enter the time.
• From 00:00:00 to 23:59:59 can be entered.
!6 Touch [].
Continued on the next page ☞
Previous view