Icom ID-5100A

12
MENU SCREEN
12-22
SSID (Default:---)
GPS > GPS TX Mode > D-PRS > TX Format > Position
> SSID
Select an SSID based on APRS
®
to add to your call
sign, to show your operating style to other stations.
The addition methods of the SSID may differ, depend-
ing on whether the call sign includes a space or not.
• ---:
The space in the call sign is converted to “-.”
If no text is programmed after the space, the
space will be deleted, and the space is not
converted to “-.”
Example: “JA3YUA” ➡ “JA3YUA”
“JA3YUA A” ➡ “JA3YUA-A”
• (-0): No SSID is added.
If a call sign includes a space, any text or
digit after the space will be deleted.
Example: “JA3YUA” ➡ “JA3YUA”
“JA3YUA A” ➡ “JA3YUA”
• -1 to -15: Adds an SSID of -1 to -15 to the call sign.
If a call sign includes a space, it will be auto-
matically changed to this set numeric ID.
Example (SSID [-9]):
“JA3YUA” ➡ “JA3YUA-9”
“JA3YUA A” ➡ “JA3YUA-9”
• -A to -Z: Adds an SSID of -A to -Z to your call sign.
If a call sign includes a space, it will be auto-
matically changed to this set letter ID.
Example (SSID [-Z]):
“JA3YUA” ➡ “JA3YUA-Z”
“JA3YUA A” ➡ “JA3YUA-Z”
AboutSSID
To assist in identifying a station’s type, designated call
sign SSIDs are used in D-PRS (APRS
®
), according to
the common guideline.
The guideline may be changed when the infrastruc-
ture environment, such as a product or network, is
changed.
Please check the latest guideline on the web site re-
lated on the D-PRS or APRS
®
, and correctly set.
Comment
GPS > GPS TX Mode > D-PRS > TX Format > Position
> Comment
Enter a comment to transmit in addition to the position
data.
You can enter up to four comments.
The number of characters you can enter differs,
depending on the Data Extension and Altitude
settings.
DataExtension Altitude
Characters
entered
(maximum)
OFF OFF 43 (Default)
OFF ON 35
Course/Speed OFF 36
Course/Speed ON 28
Power/Height/Gain/Directivity OFF 36
Power/Height/Gain/Directivity ON 28
The symbol “ ” shows the transmittable comment
range. Please note that the characters that exceed the
range will not be transmitted.
Transmittable comment range display
(In case of up to 28 characters)
TimeStamp (Default:OFF)
GPS > GPS TX Mode > D-PRS > TX Format > Position
> Time Stamp
Sets the transmitting time stamp type to DHM, HMS or
OFF.
The time stamp is transmitted in addition to the posi-
tion data in the D-PRS mode, and UTC (Universal Time
Coordinated) time is used.
• OFF: No time stamp is transmitted.
• DHM: Transmits the time stamp in the Day, Hour, and
Minute format.
• HMS: Transmits the time stamp in the Hour, Minute,
and Second format.
When your location is manually set, the time stamp
data will not be transmitted.
GPS items (Continued)
Previous view