12
MENU SCREEN
12-53
•DuringRX/Standby:
●: Default setting : Available N/A: Not available
Function Description
RemoteMICKey Up/DownMICKey
[F-1] [F-2] [UP] [DN]
--- No function
UP
Push to increase the frequency, Memory channel, repeater or
station call sign.
N/A N/A
●
DOWN
Push to decrease the frequency, Memory channel, repeater or
station call sign.
N/A N/A
●
VOL UP Push to increase the volume level. N/A N/A
VOL DOWN Push to decrease the volume level. N/A N/A
SQL UP Push to increase the squelch level. N/A N/A
SQL DOWN Push to decrease the squelch level. N/A N/A
Monitor Push to open or close the squelch.
●
CALL Push to select a call channel. N/A N/A
MR (000 CH) In the Memory mode, push to select Memory channel 000.
MR (001 CH) In the Memory mode, push to select Memory channel 001.
VFO/MR Push to toggle between the VFO mode and the Memory mode. N/A N/A
DR Push to turn the DR function ON or OFF.
FROM/TO (DR)
In the DR screen, push to toggle between “FROM” and “TO.”
Home CH
Push to directly select the Home CH that is set to the selected
mode (VFO/Memory) or DR screen.
While in the CALL CH or weather channel mode, or when no
Home CH is set, an error beep sounds.
N/A N/A
BAND/BANK
Push to select an operating band.
In the VFO mode, push to change the operating band, and in the
Memory Bank mode, push to select Bank A to Z, or OFF.
• Only the programmed bank appears.
●
SCAN
Push to start a scan.
While scanning, push to stop the scan.
Temporary
Skip
Push to set the frequency to be skipped during scanning.
The selected frequencies are temporarily skipped for faster scan-
ning.
RX>CS
Hold down for 1 second to set the last calling station call sign to
“TO” (destination).
SPEECH
Push to announce the frequency, operating mode or call sign.
- In the VFO, Memory and Call channel mode, the frequency and
the operating mode are announced.
- In the DR screen, the call sign is announced. If Simplex is se-
lected, the frequency is announced.
MAIN/DUAL
While in the single display mode, push the key to toggle between
the A Band and B Band.
While in the dual display mode, push the key to toggle between
the MAIN Band and SUB Band.
Hold down the key to toggle between the single display and the
dual display.
N/A N/A
MODE Push to change the operating mode.
LOW Push to change the transmit power level.
DUP
Push to turn the Duplex mode ON or OFF, and the shift direction
to DUP+ or DUP–.
PRIO Push to turn the Priority watch ON or OFF.
Function items (Continued)
Continued on the next page ☞
To Next Page
Loading...
