5
PRIORITY WATCH
5-19
DR scan and a priority channel (Continued)
Automatically selects the priority channel.
Remains in the DR scan screen.
Example: For a Memory channel
Blinks
Blinks
Blinks
Blinks
Whenasignalisreceived.5.
•When“ON”isselected.
When a signal is received on the priority channel, the
channel is automatically selected. The “PRIO” icon
blinks.
* The scan pause timer and resume settings are the
same as for a normal scan. (p. 12-14)
•When“Bell”isselected.
When a signal is received on the priority channel,
a beep sounds and the “S” icon blinks. The DR
scan resumes.
To Next Page
Loading...
