Icom ID-52A

12
SET MODE
12-24
Function
Battery Pack Select (Default: BP-271/BP-272)
[MENU] > SET > Function > Battery Pack Select
Selects the model of the attached battery pack to
display the optimized battery status�
Battery Pack Confirmation (Default: OFF)
[MENU] > SET > Function > Battery Pack Confirmation
Selects whether or not to display the Battery Pack
Select dialog the first time the transceiver is turned
ON after reattaching a battery pack�
Charging (Power ON) (Default: ON)
[MENU] > SET > Function > Charging (Power ON)
Selects whether or not to charge the battery pack
when the optional external DC power cable (CP-12L
or OPC-254L) is connected to [DC IN], even if the
transceiver is ON�
USB Power Input (Phone, Tablet, PC) (Default: ON)
[MENU] > SET > Function >
USB Power Input (Phone, Tablet, PC)
Selects whether or not to use a mobile device or a PC
as an external power source�
Screen Capture [PWR] Key (Default: OFF)
[MENU] > SET > Function > Screen Capture [PWR] Key
Assigns the Screen Capture function to [ ]�
• OFF: [ ] does not act as the Screen Capture key�
• ON: Pushing [ ] captures the transceiver display
onto a microSD card�
Screen Capture File Type (Default: BMP)
[MENU] > SET > Function > Screen Capture File Type
Sets the file format for the Screen Capture function to
PNG or BMP�
LO/CALL Key Actions (Default: Standard)
[MENU] > SET > Function > LO/CALL Key Actions
Selects whether or not to change the [CALL], [LO],
and [MR] keys operation to the same as the ID-51A/E�
• Standard: The key’s operations do not change�
• ID-51 Compatible (CS/LOW):
The key’s operation change as described
below�
[CALL]: Hold down for 1 second to
change the transmit power
levels�
[LO]: In the DV mode, hold down for
1 second to display the CALL
SIGN screen�
[MR]: Push to enter the Memory mode,
and then push again to enter the
Call Channel mode�
L For the ID-52A only
In the Call Channel mode,
push to enter the Weather
Channel mode�
[CALL]
[MR]
[LO]