Icom ID-52A

17
OPTIONS
17-4
The optional HM-75LS enables you to remotely select
operating frequencies, Memory channels, and other
functions.
You can assign some functions to the keys on the
HM-75LS for simple remote control operation.
(p. 12-18)
The HM-75LS has a lock switch on the back to
prevent accidental frequency changes.
NOTE:
• BE SURE to turn OFF the transceiver when plugging or

• Firmly plug the HM-75LS into the transceiver.
DAssigning a Remote Control function
Example: Assigning the “TO (DR)” function to the [A]
key.
[MENU] > SET > Function > Remote MIC Key
1. Push [MENU].
2. Select “Function” in the “SET” menu.
3. Select “Remote MIC Key.”
4. 
5. Select “[A].”
• The Assignable function list is displayed.
L About the functions, see pages 12-19 and 12-20.
Optional HM-75LS remote control speaker microphone
6. Select “TO (DR).”
• The “TO (DR)” function is assigned.
L To exit the MENU screen, push [MENU].
TIP: To return to the default settings
• 
screen, push [QUICK] and select “Default All.”
• On the each key screen, push [QUICK] and select
“Default.”
A
OFF ON
LOCK
B
A
B
Microphone
TX indicator
[PTT]
Speaker
Lock switch
[A]
[B]
[]
[]
Earphone jack