Icom ID-52A

17
OPTIONS
17-10
Connecting an iOS device to the transceiver through Bluetooth
®
DConnection
This section describes how to connect to a paired
transceiver from an iOS device.
Before connecting, pair the transceiver with the iOS
device. (p. 17-7)
L When using the ST-4001I application, the transceiver
and Android device are automatically connected while
transferring a picture.
Step 1. Starting the RS-MS1I (iOS device)
Touch the RS-MS1I to start.
L See page 17-6 for details on downloading the RS-MS1I.
Step 2. Connecting to the transceiver
(iOS device)
1. Touch “Other.”
2. Touch “Bluetooth Connection.”
3. Touch the displayed transceiver Bluetooth unit’s
name to connect.
• Starts to connect.
L When your call sign has not been entered in the
transceiver, enter it before you connect.
L If the connection has been made, the transceiver
displays “
MMM Connected.,” and the Bluetooth icon
is displayed.
Displayed
L  ” is displayed.
Device name
Displayed while connecting
TIP: To connect to the iOS device from the
transceiver
When the RS-MS1I is started on the iOS device, you
can connect to the device from the transceiver.
[MENU] > SET > Bluetooth Set > Pairing/Connect
1. Push [MENU].
2. Select “Bluetooth Set” in the SET menu.
3. 
4. Select the iOS device name displayed in the
pairing list.
5. Select “YES.”
• Displays “MMM Connecting...”
(“
MMM” is the Bluetooth name of the iOS device.)
L
 ” is
displayed on the data device icon.