Is tamp pad contacting product evenly? YES NO
Has smart tamp been adjusted? YES NO
Is product detector correctly positioned & working? YES NO
Has product delay been adjusted for all sizes of product? YES NO
Are leveling feet being used? YES NO
Is Beacon/Audible Alarm working (check all conditions)? YES NO
Has low label sensor been adjusted? YES NO
F
INAL
S
YSTEM
C
HECK
Verify all bolts on the mounting stand are tight.
Column should be secured in the column mount and unable to rotate.
Secure raising mechanism in place once applicator is at the correct height.
Leveling feet should be secured to the correct height and then locked in place.
Check all connectors and cabling.
Secure loose wires.
Test run line.
Is product spacing adequate?
YES NO
Does the product have any variation in shape or size?
YES NO
What is the max product per minute that we can now run?
Service Technician Date
Regional Office
Phone Fax
To Next Page
Loading...
