ID Technology 250 - No Selection

Model 250
Printer Applicator
Operators/Technical Manual Section Five
Section 5 Page 13 of 18
 No Selection – This option disables the output when it is not being used.
1. 1 – Label Low, Ribbon Low, Label Out, Ribbon Out,
Supply Low, Supply Out, On Line, Tamp Home, Toggle through the list
Apply Ready, Accessory, No Select until you come to the item
2. 2 – Label Low, Ribbon Low, Label Out, Ribbon Out, you want to choose.
Supply Low, Supply Out, On Line, Tamp Home,
Apply Ready, Accessory, No Select
3. 3 – Label Low, Ribbon Low, Label Out, Ribbon Out, Press the return key to
Supply Low, Supply Out, On Line, Tamp Home Accept and set the
Apply Ready, Accessory, No Select Selection.
4. 4 - Label Low, Ribbon Low, Label Out, Ribbon Out,
Supply Low, Supply Out, On Line, Tamp Home
Apply Ready, Accessory, No Select