Model 250
Printer Applicator
Operators/Technical Manual Section One
Section 1 Page 3 of 5
Storage;
Room Temperature Range:
Humidity (non-condensing):
1.11 Available Upgrades
Tamp-Jet
Reverse Tamp-Jet
Support Stand
Status Beacon (3 Stage)
System Status Output
Low Label Alarm
16 ½” Unpowered Unwind
1.12 Printers
Choice of printer units to
suit every application. The
250 Applicator will
accommodate standard
Sato, Zebra & Datamax
print engines without
modification.
1.13 The T-base Support Stand
The stand is used for mounting the machine and making it
portable. There are several accessories that can be added
to assist in the different applications. Some environments
do not allow the stand to roll up underneath the conveyor or
product handling system. In that case you may want to use
a precision slide base. In other cases you might have to
reach over a belt to reach a certain part on a product. In that
case a yardarm can be used. The following is a list and
description of the standard accessories that can be ordered
with the stand.
T-base (Support Stand)
To Next Page
Loading...
