Model 250
Printer Applicator
Operators/Technical Manual Section Three
Section 3 Page 17 of 19
FINAL SYSTEM CHECK
• Check all bolts for tightness on the mounting stand
• Column should be secured in the column mount and not able to
rotate.
• Raising mechanism needs to be secured in place after desired
height of Applicator has been acquired.
• Leveling feet should be secured to the correct height and then
locked in place.
• Check all connectors and cabling.
• Secure loose wires.
• Test run line.
• Is product spacing ok?
YES NO
• Does the product have any variation in shape or
size?
YES NO
• What is the max Product per minute that we can now run?
Employee Trained
Service Technician Date
Region Office
Phone Fax
Address
Address
City State
To Next Page
Loading...
