Model 250
Printer Applicator
Operators/Technical Manual Section Three
Section 3 Page 18 of 19
TOOLS REQUIRED
1 : SET OF METRIC LOOSE BALL END HEX KEYS (1.5 - 10MM)
2 : SET OF STANDARD LOOSE BALL END HEX KEYS
3 : LONG 9/64“ ‘T’ ALLEN
4 : # 1 PHILLIPS SCREWDRIVER
5 : LONG # 1 PHILLIPS SCREWDRIVER
6 : # 2 PHILLIPS SCREWDRIVER
7 : LONG # 2 PHILLIPS SCREWDRIVER
8 : 1/8” FLAT SCREWDRIVER
9 : 3/16” FLAT SCREWDRIVER
10 : LONG 3/16” FLAT SCREWDRIVER
11 : SET OF METRIC COMBINATION WRENCHES (7 - 11MM)
12 : 1/2” WRENCH
13 : 9/16” WRENCH
14 : 6” ADJUSTABLE
15 : SMALL DIAGONAL CUTTERS
16 : SMALL LONG NEEDLE NOSE PLIER
17 : SMALL LONG NOSE VICEGRIPS
18 : SMALL FLASHLIGHT
19 : PUSH-PULL TYPE GAUGE (0 - 1000 GRAMS)
20 : CLEANING KIT FOR PRINTER
To Next Page
Loading...
