MODEL 250 IDT BOM (STD MACHINE) MANUAL VERSION
LEVEL 1 LEVEL 2 LEVEL 3 LEVEL 4
ITEM QTY ITEM QTY ITEM QTY ITEM QTY PART NO DESCRIPTION
BASE MODULE
Model 250 Standard Machine
2 4 SHCS M4 X 30 S/S
3 4 PLAIN WASHER #8 S/S
4 1 62057 V-BELT PULLEY 60 DEG
5 1 62058 V-BELT 60 DEG
6 1 SHCS M6 X 25 S/S
7 1 SPRING CLIP EXT 1.50"
8 1 62053 REWIND ROLL
9 1 62031 IDLER SHAFT
10 2 62032 BEARING FLANGE OILITE .5"
11 1 62055 REWIND CLIP
12 1 M6 X 10 PAN HD PH S/S
13 1 WASHER PLAIN M-6 S/S
14 1 62051 REVERSABLE GERAMOTOR 24VDC 108 RPM
PNEUMATICS ASSEMBLY
62100 ASSY PNEUMATICS STD TAMP
6 1 62101 ASSY PNEUMATICS STD TAMP (SCHEMATIC)
1 1 62122 MANIFOLD, 3-STATION, MODIFIED
1 1 MANIFOLD, 3-STATION, 5 PORT W/ 1/4 ONE TOUCH
2 3 SOLENOID 4 WAY VALVE, 24VDC
3 3 REGULATOR W/ GAUGE, INTERFACE
4 1 VACUUM TRANSDUCER
5 2 (PORT PLUG) 1/4 IN.
6 3 (NPTF) PLUG FOR MANIFOLD
7 1 VACUUM MUFFLER (SILENCER)
8 1 MALE ADAPTER+
9 3 MALE CONNECTOR
ELECTRONICS ASSEMBLY
71 62500 ELECTRONIC MODULE
1 1 62501 PAX (CABLE) (OPT.)
2 1 62502 SATO S (CABLE) (OPT)
3 1 62503 SATOse (CABLE) (OPT)
4 1 62504 DATAMAX (CABLE) (OPT)
81 62280 ASSY TAMPJET KIT (OPTIONAL)
PRINT ENGINE
91 PRINT ENGINE - SATO #999999
PRINT ENGINE INSTALL KIT - SATO
1 5 SHCS M5 X 14 S/S
2 1 PATCH CABLE
Page 2
To Next Page
Loading...
