AFL-xxx-9103 Panel PC
Page 90
Serial Port1 Mode [Normal]
Use the Serial Port1 Mode option to select the transmitting and receiving mode for the
first serial port.
Normal DEFAULT
Serial Port 1 mode is normal
IrDA
Serial Port 1 mode is IrDA
ASK IR
Serial Port 1 mode is ASK IR
Serial Port2 Address [3F8/IRQ4]
Use the Serial Port2 Address option to select the I/O port address and interrupt address.
Disabled
No base address is assigned to Serial Port 2
2F8/IRQ3 DEFAULT
I/O port address is 2F8, interrupt address is IRQ3
3E8/IRQ4
I/O port address is 2F8, interrupt address is IRQ4
2E8/IRQ3
I/O port address is 2E8, interrupt address is IRQ3
Serial Port2 Mode [Normal]
Use the Serial Port2 Mode option to select the transmitting and receiving mode for the
first serial port.
Normal DEFAULT
Serial Port 2 mode is normal
IrDA
Serial Port 2 mode is IrDA
ASK IR
Serial Port 2 mode is ASK IR
Serial Port3 Address [3E8]
Use the Serial Port3 Address option to select the base addresses for serial port 3
Disabled
No base address is assigned to serial port 3
3E8 DEFAULT
Serial port 3 I/O port address is 3E8
2E8
Serial port 3 I/O port address is 2E8
To Next Page
Loading...
Need help?
General
