AFL-xxx-9103 Panel PC
Page 65
4.1 System Maintenance Introduction
If the components of the AFL-xxx-9103 fail they must be replaced, such as the wireless
LAN module or the motherboard. Please contact the system reseller or vendor to
purchase the replacement parts. Back cover removal instructions and jumper settings for
the AFL-xxx-9103 are described below.
4.2 Motherboard Replacement
A user cannot replace a motherboard. If the motherboard fails it must be shipped back to
IEI to be replaced. If the system motherboard has failed, please contact the system vendor,
reseller or an IEI sales person directly.
4.3 Internal Aluminum Cover Removal
WARNING!
Before removing the back cover, make sure the power if off. Failing to
do so may lead to severe damage of AFL-xxx-9103 series and injury to
the body.
WARNING!
Please take antistatic precautions when working with the internal
components. The interior of the AFL-xxx-9103 contains very sensitive
electronic components. These components are easily damaged by
electrostatic discharge (ESD). Before working with the internal
components make sure all the anti-static precautions described earlier
have been observed.
To replace any of the following components,
Motherboard
To Next Page
Loading...
Need help?
General
