IEI Technology AFL-xxx-9103 User Manual

AFL-xxx-9103 Panel PC
Page 47
Figure 3-3: CompactFlash® Card Slot Location
Step 3: Replace the plastic back cover. Once replaced, fasten the previously removed
retention screws. Step 0:
3.6 Hard Drive Installation
The AFL-12B-9103-R10 has space for a hard drive. To install the hard drive, please follow
the steps below:
Step 1: Remove the plastic back cover. See Section
3.5 above.
Step 2: Remove the retention screws securing the internal aluminum cover (
Figure 3-4)
and lift the aluminum cover off the panel PC.

IEI Technology AFL-xxx-9103 Specifications

General

Brand	IEI Technology
Model	AFL-xxx-9103
Category	Touch Panel
Language	English