IEI Technology AFL-xxx-9103 User Manual

AFL-xxx-9103 Panel PC
Page 71
4.5.1 AT/ATX Power Selection
This jumper sets the power as using AT power or ATX power.
JP10 Description
1-2 closed AT power
1-2 open ATX power
Table 4-1: AT/ATX Power Selection
JP12 Description
1-2 closed ATX
1-2 open AT
Table 4-2: AT/ATX Power Selection
4.5.2 Clear CMOS
The Clear CMOS jumper is for resetting the BIOS. To reset the BIOS, turn off the
computer, move the jumper to the “Clear CMOS setup” position, turn on the computer for
5 seconds, turn off, then set the jumper to the normal position. The BIOS is then returned
to default settings.
JP8 DESCRIPTION
1-2 Normal operation
2-3 Clear CMOS setup
Table 4-3: Clear CMOS
4.5.3 CompactFlash
®
Master/Slave Selection
This jumper sets the CompactFlash® disk as the IDE master or the IDE slave.
JP6 Description
Closed Master
Open Slave
Table 4-4: CompactFlash® Master/Slave Selection

IEI Technology AFL-xxx-9103 Specifications

General

Brand	IEI Technology
Model	AFL-xxx-9103
Category	Touch Panel
Language	English