AFL-xxx-9103 Panel PC
Page 51
for each panel PC can be set individually and controlled remotely. Other possible
application includes
Security surveillance
Point-of-Sale (POS)
Advertising terminal
3.8 Mounting the System
WARNING!
When mounting the flat panel PC onto an arm, onto the wall or onto a
panel, it is better to have more than one person to help with the
installation to make sure the panel PC does not fall down and get
damaged.
The four methods of mounting the AFL-xxx-9103 are listed below.
Wall mounting
Stand/Arm mounting
The four mounting methods are described below.
3.8.1 Wall Mounting
To mount the flat panel PC onto the wall, please follow the steps below.
Step 1: Select the location on the wall for the wall-mounting bracket.
Step 2: Carefully mark the locations of the four brackets screw holes on the wall.
Step 3: Drill four pilot holes at the marked locations on the wall for the bracket retention
screws.
Step 4: Align the wall-mounting bracket screw holes with the pilot holes.
To Next Page
Loading...
Need help?
General
