AFL-xxx-9103 Panel PC
Page 104
Enabled
OEM Logo displayed instead of POST messages
AddOn ROM Display Mode [Keep Current]
Use the AddOn ROM Display Mode option to allow add-on ROM (read-only memory)
messages to be displayed.
Force BIOS
The system forces third party BIOS to display
during system boot.
Keep Current DEFAULT
The system displays normal information during
system boot.
Bootup Num-Lock [On]
Use the Bootup Num-Lock BIOS option to specify if the number lock setting must be
modified during boot up.
Off
Does not enable the keyboard Number Lock automatically. To
use the 10-keys on the keyboard, press the Number Lock key
located on the upper left-hand corner of the 10-key pad. The
Number Lock LED on the keyboard lights up when the Number
Lock is engaged.
On DEFAULT
Allows the Number Lock on the keyboard to be enabled
automatically when the computer system boots up. This allows
the immediate use of the 10-key numeric keypad located on
the right side of the keyboard. To confirm this, the Number
Lock LED light on the keyboard is lit.
LAN Boot
The LAN Boot option is for listening for a turn-on signal over the network. The network is
kept in a semi-active state, simply listening for the correct signal.
Disabled DEFAULT
The network port does not listen for signals over the
network
To Next Page
Loading...
Need help?
General
