Intec CS4000 - Configuration Tool; Windows; Macintosh; Network Setting Items

- 164 - - 165 -
Network setting items Network setting items
5
1
2
4
3
5
1
2
4
3
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software

TCP/IP
Item
Factory
Default
Settings
Explanation
Web Page
Conguration
Tool/ Network
Setting Plug-in
Network Card
Setup Utility
(Mac OS X)
IP address
setting
IP address
acquisition
method
IP address
acquisition
method
Auto Species the IPv4 address setup methods.
IPv4 address IP address IP address xxx.xxx.xxx.
xxx
Sets the IPv4 address.
Subnet mask Subnet mask Subnet mask xxx.xxx.xxx.
xxx
Sets the subnet mask.
Gateway
address
Default
gateway
address
Default
gateway
address
xxx.xxx.xxx.
xxx
Sets the gateway address.
DNS server
address
(primary)
- - 0.0.0.0 Species the IP address of the primary DNS
server.
Make sure to set this item if specifying the STMP
server using the domain name.
DNS server
address
(secondary)
- - 0.0.0.0 Species the IP address of the secondary DNS
server.
Make sure to set this item if specifying the STMP
server using the domain name.
Dynamic DNS - - Disable Species whether to register the information to
the DNS server when the settings have changed.
Domain name - - (None) Sets the domain name for the device.
WINS server
(primary)
- - 0.0.0.0 Species the WINS server name or IP address
(Windows only).
WINS server
(secondary)
- - 0.0.0.0 Species the WINS server name or IP address
(Windows only).
Scope ID - - (None) Species the WINS Scope ID. Specify using 1 to
233 single-byte characters.
Windows - - Disable Species whether to use the Windows auto
detection function.
Macintosh - - Enable Species whether to use the Macintosh auto
detection function.
Printer name - - Intec-(Product
name)-(Last 6
digits of MAC
address)
Species the device name displayed when the
auto detection function is enabled.
WSD Print - - Enable Species whether to use WSD Print.
LLTD - - Enable Species whether to use LLTD.

EtherTalk
Item
Factory
Default
Settings
Explanation
Web Page
Conguration
Tool/ Network
Setting Plug-in
Network
Card Setup
Utility
(Mac OS X)
Zone name - - * Species the EtherTalk zone name using 32
single-byte characters max.
Printer name - - (Product
name)
Species the EtherTalk printer name using 31
single-byte characters max.
z
Network setting items
This section explains the items that can be set using the network functions.
Press the scroll buttons
or on the control panel, and then select [Print printer
information]>[Network] to print a settings list and check the current network settings.
Reference
z
For how to print the network settings list, see “Printing printer information” (P.218).
The network settings can be changed using the device web page, Conguration Tool, and Network Card
Setup Utility. See the following table for the menus that can be used with the utilities.

Device Information
Item
Factory
Default
Settings
Explanation
Web Page
Conguration
Tool/ Network
Setting Plug-in
Network
Card Setup
Utility
(Mac OS X)
Administrator
contacts
- - (None) Specify the system administrator contact details
using 255 single-byte characters max.
Printer name - - Intec-(Product
name)-(Last 6
digits of MAC
address)
Set the device name using 31 single-byte
characters max.
Short printer
name
- - (Product
name)-(Last 6
digits of MAC
address)
Set the device short printer name using 15
single-byte characters max.
Installation
location
- - (None) Set the device location using 255 single-byte
characters max.
Printer control
number
- - (None) Set a user-dened number to manage the device
using 32 single-byte characters max.

General Network Setup
Item
Factory
Default
Settings
Explanation
Web Page
Conguration
Tool/ Network
Setting Plug-in
Network
Card Setup
Utility
(Mac OS X)
NetBIOS over
TCP
- - Enable Sets whether to use or not use NetBIOS over
TCP protocols.
EtherTalk - - Disable Sets whether to use or not use EtherTalk
protocols.
Gigabit
network
- - Disable Sets whether to use or not use the Gigabit
network.
Hub
connection
- - Auto Species the baud rate and communications
methods between the hub and the device.