Intec CS4000 - Using Snmpv3

- 208 - - 209 -
Setting the network from the web browser Setting the network from the web browser
5
1
2
4
3
5
1
2
4
3
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software
4
Enable the SNMP version to be used
check box in [STEP1], and click [To
STEP2].
Memo
z
If [SNMPv3] is selected, referencing and setups
using SNMPv1 will be disabled. If [SNMPv3+v1] is
selected, both SNMPv1 and SNMPv3 can be used for
referencing, but only NMPv3 can be set.
5
Enter the SNMPv3 user name in [User
Name] in [STEP2].
6
Enter the authentication password in
[Passphrase] in [Authentication Settings].
7
Select [Algorithm].
8
Enter the encryption pass phrase in
[Passphrase] in [Privacy (Encription) Settings].
Memo
z
Only [DES] can be selected as the encryption algorithm.
9
Click [Submit].
10
The settings will be save in the printer,
and the network functions will restart.
Memo
z
Set the context name for the SNMP manager to be used in
"v3context".
8
Check the set details of the malfunction
notications conditions.
z
Displaying tables
(1)
Click the [Show current settings
table] button.
(2)
Check the set details, and close the window.
z
Comparing the set conditions for 2 addresses
(1)
Use the list box to select each
address to be compared.
(2)
Check the settings details that are
displayed.
Memo
z
You can change the notication condition settings
by clicking the set conditions comparison details.
9
Click [Submit].
10
The settings will be save in the printer,
and the network functions will restart.
Using SNMPv3
The device is equipped with a SNMPv3-
compatible agent.
You can safely encrypt the device management
using SNMP if using the SNMPv3-compatible SNMP
manager.
1
Log in as an administrator.
Reference
z
See “Logging in as an administrator” (P.184).
2
Click [Admin Setup]>[Network Setup]
tab.
3
Click [SNMP]>[Settings].