Intec CS4000 - Page 90

- 170 - - 171 -
Network setting items Network setting items
5
1
2
4
3
5
1
2
4
3
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software
Item
Factory
Default
Settings
Explanation
Web Page
Conguration
Tool/ Network
Setting Plug-in
Network
Card Setup
Utility
(Mac OS X)
Trap send
authorizations
1 to 5
- - Disable Species whether to use printer trap in TCP
numbers 1 to 5.
Printer restart
1 to 5
- - Disable Species whether to send SNMP messages when
the printer is restarted.
Illegal trap
receipt 1 to 5
- - Disable Species whether to use the trap when the
device is accessed using a utility name not set
using [Printer trap community name setup].
Online 1 to 5 - - Disable Species whether to send SNMP messages
whenever the device is online.
Ofine 1 to 5 - - Disable Species whether to send SNMP messages
whenever the device is ofine.
No paper 1 to
5
- - Disable Species whether to send SNMP messages when
the device is out of paper.
Paper jam
1 to 5
- - Disable Species whether to send SNMP messages when
a paper jam occurs.
Cover open 1
to 5
- - Disable Species whether to send SNMP messages when
the device cover is open.
Printer error 1
to 5
- - Disable Species whether to send SNMP messages when
an error occurs.

IPP
Item
Factory
Default
Settings
Explanation
Web Page
Conguration
Tool/ Network
Setting Plug-in
Network
Card Setup
Utility
(Mac OS X)
IPP - - Disable Species whether to use IPP.
Notices
from the
administrator
- - (None) Enter a message according to the language
selected using [Character code] and [Language].
Character code - - UTF-8 Species the character set used when sending
the settings to the device.
Language - - EN-US
Species the language used in the setup, including
the text strings.
AUTHENTICATION - - NONE Species whether to use authentication when
implementing IPP printing.
User name 1
to 50
- - (None) Species the user name using 63 single-byte
characters max. If [BASIC] has been selected in
[Secure print].
Password 1 to
50
- - (None) Species the password using 16 single-byte
characters max. If [BASIC] has been selected in
[Secure print].
Item
Factory
Default
Settings
Explanation
Web Page
Conguration
Tool/ Network
Setting Plug-in
Network
Card Setup
Utility
(Mac OS X)
Security - - Disable Sets whether to notify you of warnings occurring in
the security functions.
Enabled only if periodic notications are selected.
Advanced - - 2H 0M Sets whether to notify you of other major errors.
Enabled only if notify upon occurrence is selected.
Advanced - - Enable Sets whether to notify you of other major errors.
Enabled only if periodic notications are selected.

SNMP
Item
Factory
Default
Settings
Explanation
Web Page
Conguration
Tool/ Network
Setting Plug-in
Network
Card Setup
Utility
(Mac OS X)
Setting SNMP
to be used
- - SNMPv3+v1 Species the SNMP version.
User name - - root Set the SNMPv3 user name using 32 single-byte
characters max.
Secure Print
Setting
Pass phrase
- - (None) Sets the password to create an authentication
key for SNMPv3 packet authentication. Set using
8 to 32 single-byte characters.
Secure Print
Setting
Algorithm
- - MD5
Species the algorithm for SNMPv3 packet
authentication.
Encrypted
settings
Pass phrase
- - (None) Sets the password to create a privacy key for
SNMPv3 packet encryption. Set using 8 to 32
single-byte characters.
Encrypted
settings
Algorithm
- - DES Species the algorithm for SNMPv3 packet
encryption. This value cannot be changed.
New SNMP
read
community
- - public Sets the SNMPv1 read community using 15
single-byte characters max.
New SNMP
write
community
- - public Sets the SNMPv1 write community using 15
single-byte characters max.

SNMP Trap
Item
Factory
Default
Settings
Explanation
Web Page
Conguration
Tool/ Network
Setting Plug-in
Network
Card Setup
Utility
(Mac OS X)
Printer trap
community
setup
- - public Sets the printer trap community using 31 single-
byte characters max.
Address 1 to 5 - - 0.0.0.0 Species the trap notication destination. You
can specify up to 5 addresses max.