Intec CS4000 - Page 92

- 174 - - 175 -
Network setting items Network setting items
5
1
2
4
3
5
1
2
4
3
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software
Item
Factory
Default
Settings
Explanation
Web Page
Conguration
Tool/ Network
Setting Plug-in
Network
Card Setup
Utility
(Mac OS X)
State/Province - - (None) Species the state or prefectural name to
which the user belongs using 128 single-byte
characters max.
Country/
Region
- - (None) Species the country code or region code using 2
single-byte characters.
Key exchange
method
- - RSA Species the key method for encrypted
communications.
Key size - - 1024bit Species the key size for encrypted
communications.

IPSec
Item
Factory
Default
Settings
Explanation
Web Page
Conguration
Tool/ Network
Setting Plug-in
Network
Card Setup
Utility
(Mac OS X)
IPSec - - Disable Species whether to use IPSec.
IP address
1 to 50
- - 0.0.0.0 Species the host that authorizes
communications using IPSec.
IKE encryption
Algorithm
- - AES-CBC 128 Species the IKE encryption method.
IKE hash
Algorithm
- - SHA-1 Species the IKE hash method.
Dife-Hellman
group
- - Group2 Species the Dife - Hellman group used by
"Phase 1 Proposal".
Lifetime - - 28800 (s) Species the "ISAKMP SA" lifetime.
Advance
common key
- - (None) Species the advance common key.
Key PFS - - NOPFS Species whether to use Key PFS (Perfect
Forward Secrecy).
Dife -
Hellman group
when Key PFS
is enabled
- - None Species the Dife - Hellman group used by Key
PFS.
ESP encryption
Algorithm
- - AES-CBC 128 Species the algorithm for the ESP encryption
algorithm.
ESP
authentication
Algorithm
- - SHA-1 Species the algorithm for the ESP authentication
algorithm.
AH
authentication
Algorithm
- - SHA-1 Species the AH authentication algorithm.
Lifetime - - 3600 (s) Species the "IPSec SA" lifetime.

MAC address ltering
Item
Factory
Default
Settings
Explanation
Web Page
Conguration
Tool/ Network
Setting Plug-in
Network
Card Setup
Utility
(Mac OS X)
MAC address
ltering
- - Disable Species whether to use MAC address ltering.
This function is used to control access from the
MAC address. Make sure to make the following
category settings if enabling MAC address
ltering. Unless these settings are made, the
device cannot be accessed via a network.
Notications
from the
following MAC
addresses
- - Authorization Species whether to authorize or deny access
from the specied MAC address.
MAC address 1
to 50
- - 00:00:00:
00:00:00
Species the MAC address to which ltering is
applied.
MAC address
of the
registered
administrator
- - 00:00:00:
00:00:00
Automatically species the administrator MAC
address.
Normally only this address can access the device.
All accesses are authorized via proxy servers if
the administrator accesses the server via a proxy
server.

Encryption (SSL/TLS)
Item
Factory
Default
Settings
Explanation
Web Page
Conguration
Tool/ Network
Setting Plug-in
Network
Card Setup
Utility
(Mac OS X)
HTTP/IPP - - Disable Species whether to encrypt HTTP/IP communications.
HTTP/IPP
encryption
strength
- - Standard Species the encryption strength of HTTP/IPP
communication.
Incoming FTP - - Disable Species whether to encrypt receiving via FTP.
FTP receiving
encryption
strength
- - Standard Species the encryption strength of receiving via
F T P.
SMTP receiving - - Disable Species whether to encrypt receiving via SMTP.
SMTP receiving
encryption
strength
- - Standard Species the encryption strength of receiving via
SMTP.
Select the type
of certicate
used.
- - Using the
certicate
signed by you
Creates your signed certicate. Further, creates
the CSR to be sent to the authenticator, and
installs the certicate issued by the authenticator.
Common
Name
- - (Printer IP
address)
The device IP address is specied when your
signed certicate is created.
Organization - - (None) Species the formal name of the organization
to which the user belongs using 64 single-byte
characters max.
Organizational Unit - - (None) Species the name of the sub-group (store, etc.)
to which the user belongs using 64 single-byte
characters max.
Locality - - (None) Species the region name to which the user
belongs using 128 single-byte characters max.