ITech IT8200 Series Programming Guide

SYSTem Commands
Copyright © ITECH Electronic Co., Ltd. 9
Query syntax
SYSTem:LANGuage?
SYSTem:SOFT:KEYBoard[:STATe] <CPD>
This command is used to set and query the UI soft keyboard switch of the present
power supply.
Syntax
SYSTem:SOFT:KEYBoard[:STATe] <CPD>
Arguments
0|OFF|1|ON
Example
SYST:SOFT:KEYB 1
Query syntax
SYSTem:SOFT:KEYBoard[:STATe]?
SYSTem:KNOB:IMMediate:EFFective <CPD>
This command is used to set and query whether the parameters adjusted by the
knob take effect immediately.
Syntax
SYSTem:KNOB:IMMediate:EFFective <CPD>
Arguments
0|OFF|1|ON
Default value
0
Returns
0|1|
Example
SYST:KNOB:IMM:EFF 1
Query syntax
SYSTem:KNOB:IMMediate:EFFective?
SYSTem:COMMunicate:USB:TYPE <CPD>
This command is used to set and query the USB interface type. IT7900 series
power supply USB can be set as the host or device type, used to set the USB
interface for communication or as a storage disk. When set as host type, it is used

ITech IT8200 Series Specifications

General

Brand	ITech
Model	IT8200 Series
Category	Measuring Instruments
Language	English