ITech IT8200 Series Programming Guide

SYSTem Commands
Copyright © ITECH Electronic Co., Ltd. 13
Query syntax
SYSTem:COMMunicate:LAN:IP[:CONFiguration]:MODE?
SYSTem:COMMunicate:LAN:SMASk <SPD>
This command is used to set and query the subnet mask of the LAN.
Syntax
SYSTem:COMMunicate:LAN:SMASk <SPD>
Arguments
<SPD>
Default value
"255.255.255.0"
Returns
<SPD>
Example
SYST:COMM:LAN:SMAS "255.255.255.1" //This command is used to set the
subnet mask of the LAN.
Query syntax
SYSTem:COMMunicate:LAN:SMASk?
SYSTem:COMMunicate:LAN:DGATeway <SPD>
This command is used to set and query the gateway address of the LAN
communication.
Syntax
SYSTem:COMMunicate:LAN:DGATeway <SPD>
Arguments
<SPD>
Default value
"192.168.0.1"
Example
SYST:COMM:LAN:DGAT "192.168.0.1"
Query syntax
SYST:COMM:LAN:DGAT?

ITech IT8200 Series Specifications

General

Brand	ITech
Model	IT8200 Series
Category	Measuring Instruments
Language	English