ITech IT8200 Series Programming Guide

SYSTem Commands
Copyright © ITECH Electronic Co., Ltd. 12
SYSTem:COMMunicate:LAN:IP[:CONFiguration] <SPD>
This command is used to set and query the IP address of the instrument.
Syntax
SYSTem:COMMunicate:LAN:IP[:CONFiguration] <SPD>
Arguments
<SPD>
Defaults
"192.168.0.11"
Returns
<SPD>
Example
SYST:COMM:LAN:IP "192.168.0.11"
Query syntax
SYSTem:COMMunicate:LAN:IP[:CONFiguration]?
SYSTem:COMMunicate:LAN:IP[:CONFiguration]:MODE
<CPD>
This command is used to set and query the IP mode of the LAN port.
⚫ MANual: the user manually sets the IP-related parameters.
⚫ AUTO: the system automatically configures IP related parameters.
Syntax
SYSTem:COMMunicate:LAN:IP[:CONFiguration]:MODE <CPD>
Arguments
<CPD>
AUTO|MANual
Default value
MANual
Returns
AUTO|MANual
Example
SYST:COMM:LAN:IP:MODE AUTO //Set the IP mode of the LAN interface to
automatic configuration mode.

ITech IT8200 Series Specifications

General

Brand	ITech
Model	IT8200 Series
Category	Measuring Instruments
Language	English