ITech IT8200 Series Programming Guide

SYSTem Commands
Copyright © ITECH Electronic Co., Ltd. 11
SYSTem:COMMunicate:GPIB:ADDRess <NR1>
This command sets and queries the GPIB address of the power supply.
Syntax
SYSTem:COMMunicate:GPIB:ADDRess <NR1>
Arguments
<NR1>
Settable range :1~30
Default value
1
Returns
<NR1>
Example
SYST:COMM:GPIB:ADDR 2
Query syntax
SYSTem:COMMunicate:GPIB:ADDRess?
SYSTem:COMMunicate:SERial:BAUDrate <CPD>
This command sets and queries the baud rate of the serial port.
Syntax
SYSTem:COMMunicate:SERial:BAUDrate <CPD>
Arguments
<CPD>
115200|57600|38400|19200|9600|4800
Default value
9600
Returns
<CPD>
Example
SYST:COMM:SER:BAUD 4800
Query syntax
SYSTem:COMMunicate:SERial:BAUDrate?

ITech IT8200 Series Specifications

General

Brand	ITech
Model	IT8200 Series
Category	Measuring Instruments
Language	English