Answer yes.
Now restart Unisab III to make the change take effect. Unisab III is now updated to version
1.0.6.5, (including 18 language files and configuration files) which can be seen if you enter
the boot loader again.
If there is no SD (MMC) card in the card socket or no card with a valid software path on the
SD card in the socket, you will get the following error message when you press
F1
/Update.
Unisab III (boot) and communication set-up
Engineering manual - Unisab III 1.10
001930 en 2014.09
255/319
To Next Page
Loading...
