• The settings can also be exported directly to an SD card as seen below where all elev-
en Unisab III .xml files are already available on the card.
• You may also choose to save all the settings made in U Set as one .xls (excel) file.
This file cannot be uploaded to Unisab III. The file can be saved with a Save or Save
As command with the file name and position you choose.
When the files have been exported or you have used the Save/Save As command you can
close the U Set program.
Download settings from Unisab III
It is not possible to import or export directly from Unisab III to U Set, you need to use a PC
drive or SD card as an intermediate storage.
To review, modify or print the configuration and settings in Unisab III the relevant file(s) must
be transferred from Unisab III to your PC. This can be done by SD card or with a network
connection:
• To transfer by SD card: Insert the card into Unisab III and enter the Boot/Update
menu. Before inserting the SD card make sure it contains an empty directory with the
following path: E:\UnisabIII\updates\1_0_9_0. Note that the drive letter E:\ and the
version number 1_0_9_0 are examples only and may very well be different from
yours.
Unisab III (boot) and communication set-up
280/319
Engineering manual - Unisab III 1.10
001930 en 2014.09
To Next Page
Loading...
Need help?
General
