Juniper EX3400

authentication {
... authentication-configuration
}
dynamic-profile profile-name {
... dynamic-profile-configuration
}
relay-agent-interface-id {
... relay-agent-interface-id-configuration
}
relay-agent-remote-id {
... relay-agent-remote-id-configuration
}
service-profile dynamic-profile-name;
}
duplicate-clients-in-subnet (incoming-interface | option-82):
dynamic-profile profile-name {
aggregate-clients (merge | replace);
use-primary primary-profile-name;
}
forward-only {
logical-system <current | default | logical-system-name>;
routing-instance <current | default | routing-instance-name>;
}
forward-only-replies;
forward-snooped-clients (all-interfaces | configured-interfaces |
non-configured-interfaces);
group group-name {
access-profile profile-name;
active-server-group server-group-name;
authentication {
...
}
dynamic-profile profile-name {
...
}
forward-only {
logical-system <current | default | logical-system-name>;
routing-instance <current | default | routing-instance-name>;
}
forward-only {
logical-system <current | default | logical-system-name>;
routing-instance <current | default | routing-instance-name>;
}
interface interface-name {
access-profile profile-name;
exclude;
liveness-detection {
failure-action (clear-binding | clear-binding-if-interface-up | log-only);
method {
bfd {
version (0 | 1 | automatic);
minimum-interval milliseconds;
minimum-receive-interval milliseconds;
multiplier number;
no-adaptation;
transmit-interval {
179Copyright © 2017, Juniper Networks, Inc.
Chapter 12: Configuration Statements (DHCP and DHCP Relay)