Juniper PTX10001-36MR - Page 28

Table 7: Chassis Status LEDs on a PTX10001-36MR Device (Connued)
Name Color State Descripon
Yellow On steadily A minor alarm has occurred, such as
a soware error. Power o the
device by seng the AC power
source outlet to the OFF (O)
posion, or unplugging the AC
power cords. Power on the device
and monitor the status LEDs to
ensure that Junos OS Evolved boots
properly.
Yellow Blinking Both a major and a minor alarm is
occurring on the device.
OK/FAIL Green On steadily There are no fault condions on the
device.
Red Blinking A fault has occurred on the device.
PTX10001-36MR Management Port LEDs
There is one management port on the PTX10001-36MR that has LEDs that indicate link status and link
acvity. The port is located on the management panel above the USB port and is labeled MGMT. The
19