Chapter 1. The Kaye Validator AVS
Kaye Validator AVS User’s Manual 2
Up to four Kaye Sensor Input Modules (SIMs) per Validator (each SIM supplies up
to 12 thermocouple sensors)
A Kaye high temperature reference (HTR 400), a Kaye low temperature reference
(LTR –90, LTR –25/140 or LTR –40/140), or a Kaye cold temperature reference
(CTR –40 or CTR –80) for sensor calibration and verification
A Kaye Intelligent RTD probe (IRTD)
Premium grade thermocouples
Additional temperature and non-temperature sensors for qualification studies
(optional)
Users can select, and log in to, any Kaye Validation Console to communicate with any
Validator AVS, monitoring current studies and calibrations. Using the synchronization all
Assets, Studies, and Qualification data are visible across all Consoles. While a Console can
log in to one Validator at a time, multiple Consoles can log in to the same Validator AVS.
Users can disconnect a Console after initiating a study or qualification; also, any user with
any Console can stop a calibration or study currently running on any Validator AVS. Both
Consoles and Validator AVS’ can be on a user's local network, and users can obtain
software upgrades for the Consoles.
To Next Page
Loading...
