Appendix B. Environmental Compliance
DRAFT
Console Specifications
Power Supply (ITE) Delta
Electronic, SADP-65NB Rev.
BB
Input : 1.5A, 100-240VAC, 47-63Hz
Output:19V DC, 3.42 A
The power supply is compliant with UL-60950-1, CAN/CSA C22.2
No.60950-1, and IEC/EN 60950-1
B.3 FCC Part 15 details
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The manufacturer of this devise, as an intentional and / or unintentional radiator, cautions the user
that changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
15.105(a) “Note: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.”
“Caution: To maintain compliance with the FCC’s RF exposure guidelines, place the product at least
20 cm from nearby person”
To Next Page
Loading...
