6. Engine Removal;In
spection & Installation
6-43
7
.4 The right of the bearing inspection
1. Use hand turn sluggish, bearing whether
card bearing radial clearance is too large,
if have, replace bearing.
2. 6001 Bearing radial clearance standards
0.011-0.025 mm
3. 6304 Bearing radial clearance standards
0.013-0.028 mm
7.5 Right crankshaft case check up
1. the diameter standard：∮72.000-72.025 mm
2. the Maximum diameter：∮72. 080 mm
6
To Next Page
Loading...