Keithley 2701 User Manual

1-2 Getting Started Model 2701 User’s Manual
General information
Warranty information
Warranty information is located at the front of this manual. Should your Model 2701
require warranty service, contact the Keithley representative or authorized repair facility in
your area for further information. When returning the instrument for repair, be sure to fill
out and include the service form at the back of this manual to provide the repair facility
with the necessary information.
NOTE The service form requires the serial number of the Model 2701. The serial
number label is located inside the unit on the bottom panel. The serial number
can be viewed by removing the slot covers and/or switching modules from the
mainframe.
WARNING Before removing (or installing) switching modules, make sure to turn
off the Model 2701 and disconnect the line cord. Also, remove any
other external power connected to the instrument or switching
module(s).
The serial number can also be read from the front panel by selecting the SNUM
item of the SETUP menu. Press SHIFT and then SETUP to access the menu. For
remote operation, the serial number can be read using the *IDN? command (see
Section 12 for details).
Also, the serial number can be read from the internal web page of the
Model 2701 using Internet Explorer. See Internal web page in Section 10 for
details.
Contact information
Worldwide phone numbers are listed at the front of this manual. If you have any questions,
please contact your local Keithley representative or call a Keithley Application Engineer at
1-800-348-3735 (U.S. and Canada only).

Keithley 2701 Specifications

General

Max Voltage	300 V
Max Current	3 A
Frequency Range	3 Hz to 500 kHz
Frequency Accuracy	0.01%
Weight	3.6 kg
Measurement Functions	Frequency, Temperature
Interface	IEEE-488 (GPIB), RS-232
DC Voltage Range	300 V
DC Current Range	3 A
AC Voltage Range	300V
AC Current Range	1 μA to 3 A
Resistance Accuracy	0.01%
Channels	10
Dimensions	213mm x 88mm x 370mm