Keithley 2701

10
Remote Operations
• Operation enhancements — Summarizes some of the more important operations
that can only be performed using remote operation.
• System commands — Summarizes the commands used to select and configure an
interface for remote programming. Also covers other system commands that
pertain to remote operation.
• Ethernet setup — Shows some typical Ehternet systems, covers connections, and
explains how to select and configure the Ethernet.
• Front panel aspects of Ethernet operation — Summarizes error messages, status
indicators, and using the LOCAL key.
• Programming syntax — Describes the basic programming syntax for both
common and SCPI commands.
• RS-232 interface operation — Outlines use of the RS-232 interface to control the
Model 2701.